The four most famous international exchanges:

Binance INTL	OKX INTL	Gate.io INTL	Huobi INTL
China Line　APP DL	China Line　APP DL	China Line　APP DL	China Line　APP DL

Note: The above exchange logo is the official website registration link, and the text is the APP download link.

How to reset the Ebit E9 mining machine? Attached is a detailed step-by-step tutorial. Regarding digital currency, we usually mention mining, because the Bitcoin mining incident some time ago made many people have a lot of knowledge about mining. I have big doubts, but on the one hand it is because of this mentality, and on the other hand I am thinking about how to dig. This is quite contradictory. Recently, everyone has mentioned a new question about mining: how to reset the Ebit e9 mining machine? In response to this problem, below, the editor will give you a general explanation and the corresponding knowledge popularization .

The Ybit mining machine uses a WEB interface to set up, which is simple and friendly. Through the following steps, you can easily complete the setting of Ybit. The factory IP of Yibit is usually 192.168.80.140. If your machine is faulty, please don't worry, we provide you with a 6-month warranty for the entire machine and a 12-month warranty for the controller. Please be patient and read the following steps

1) The default address of the latest batch of Ybit machines is 192.168.80.140. If the hardware connection is normal and the input cannot be opened, it may be that the mining machine and computer IP are not in the same network segment and need to be set.

1: Open your router configuration and set the router's LAN port to 192.168.80.1. Generally, the default router is 192.168.1.1 or 192.168.0.1, yes
192.168.80.1, there is no need to modify it. After modification, restart the router and connect the E-bit to the router with a network cable.

2: Set the IP of your computer’s wired network card to 192.168.80.199, subnet mask 255.255.255.0, and leave the gateway blank. First, click Network Neighbors to find Local Area Connection and select it.
Internet protocol point properties, open the window settings, click OK and then confirm, and finally right-click the local connection point to repair to ensure that the settings take effect in real time

2) After the routing restart is completed, open your browser, enter the IP address of your mining machine fan, the default is 192.168.80.140, and then press Enter. Enter the default user account of the miner
admin, the default password is also admin, then click login to log in.

3) After logging in to the mining machine, click Device Information -----Device Status to see the device frequency, computing power, and temperature.
, the system configuration is displayed on the page (intuitive reflection of the number of unanswered mining pool tasks, computing power warnings, temperature warning thresholds, equipment shutdown temperature thresholds, frequency settings, etc.).